Oak Veneer Wooden Frames For Prints - Landscape and Portrait Formats

£95.00
Aperture size
Frame and Mount Selection
Ordering a new print from us - have it framed and delivered ready to hang

If ordering for a print you are purchasing from GalleryThane, select the same size as your print. If ordering several prints and different frames please contact us to send a message confirming which print is to be inserted into each frame.

Details

Oak Veneer Wooden Frames For Prints - Landscape and Portrait Formats

made from sustainably sourced pine or ayous

Frame dimensions

refer to the aperture size of the frame or of the inserted mount when chosen and not overall size

Moulding measurements:

31 mm wide and 14 mm deep

Mount board

width varies by frame size eg. 

8x10 inch image = recommended mount board width 1 inch

30x40 inch image = recommended mount board width 3 inches

mount and frame example for 80x100cm print

Sleek elegant frames 

All sizes hang in portrait or landscape 

Fitted with high quality clear acrylic, MDF backing board and corner protectors. 

Made to order within 5 working days of receipt of orders

Mounts are made from 1.4mm white core acid free mount board

Size Options

SIZING

Frame size quoted is the aperture area.

Mounts and frames add considerably to the final dimensions.

For example, the 8x10 inch print with white mount and white frame will measure approximately 10x14 inches overall and the 24x30 inch print with white mount and white frame will measure approximately 32x38 inches overall.

CUSTOM SIZES AVAILABLE ON REQUEST

Mounts

All of our frames are fitted with a backing board with integral hanging points.

Our mounts are cut from sustainable sourced acid free board. The mount aperture is typically 1/4 inch (6mm) smaller than the stated size in both directions to allow the mounting of borderless prints.

Glazing

Frames up to 16x20 inches are fitted with high clarity glass and larger frames are fitted with high quality acrylic which has the same visual clarity as our glass. These sheets have a protective film on both sides which should be removed before use.